Riken简单固定二氧化碳仪表RI-600（0-10,000 ppm）AC 100V规格（带有可追溯性证书） RI600-00 AC 10000 X2000

Target gas: CO2
Depth (mm): 35.5
Height (mm): 120
Detection range: 0 to 10,000 ppm
Width (mm): 80
Detection principle: Non-dispersive infrared absorption type
Concentration display: LCD digital display (5 digits, 7 segments/Green, orange, red 3-color backlight) *默认情况下，背光设置为关闭。
Display resolution: 2000 ppm to 10,000 ppm: 10 ppm Detection method: Diffusion type Alarm setting value: 1st: 1000 ppm/2nd: 1000 ppm [Standard setting value] Instruction accuracy (under the same conditions): Within ±5%FS (for gas concentration signal output) Response time (under the same conditions): 90% response within 60 seconds Gas alarm type: 2-stage alarm (H-HH) Gas alarm显示：1st：（橙色）上的集中注意力显示和背光 - 蜂鸣器 /第二个：（红色） - 蜂鸣器的浓度显示和背光 *背光和蜂鸣器设置为标准。
煤气警报操作：自动恢复
气警报接触：非电压触点的1A，始终降压（警报激发）

故障警报/自我诊断：系统异常/传感器连接异常


故障警报显示：内容显示和背光闪光（橙色）/buzzer *Backzzer *背光乘坐Backlight of Backlight of Beacklight of Backlight off off off off off off off off off off off dectault。
Fault alarm operation: Automatic recovery
Contact capacity: AC125V, 1A
Transmission specifications: DC4-20mA (non-insulated, load resistance below 300Ω)
Power supply: AC100V ±10%, 50/60Hz
Power consumption: AC specifications: Up to 6VA
Initial clearance: Approximately 25 seconds
Structure: Wall-mounted, integrated传感器

-

200G

0-40°C（没有突然变化），90％或更少（无凝结）

traceabibility证书（1组） *文档的细分包括：气体检查报告（气体制造商发行的认证），露骨性系统（用于气体生产的跟踪系统图），露骨性图表（设备的跟踪系统图（设备和测量工具））

-

-

• rohs2