产品详情
[功能]
●扳手端部件旋转约300度！视图和显示面板始终是平行的，使其易于使用。
●全件式显示器，轻巧和紧凑！
●无杀剂使其更容易使用。即使在长时间的工作中，它也可以执行稳定的测量。
●螺钉拧紧的计数器功能也标准了。
●可以通过通过/失败判断来保存5个通道，即使紧缩条件发生了变化， 也可以通过切换通道设置它们。
[规格]
●测量范围（n・m）：0.20至20.00
●准确性（℃）：±0.5％（4.99或更小±0.03n・m）
模式：PP（PEEK）/保持负载的 大值。显示屏根据TR（轨道）/负载更改而更改。 PD（pheak down）/保持负载从上升到下降的时刻。 C（实时输出）/数据输出，并保存每1/160秒大约每1/160秒所施加的负载。
●Upper and lower limit setting: Both the upper and lower limits can be set within the measurement range Save up to 5 sets
●Pass and Fail judgment function: Check pass and fail judgment within the set range (in P-P mode) Check when the lamp is on GOOD (again) - Green, NG (again) - Red
●Maximum value, minimum value, average value: Displays the number of data, maximum, minimum value, average value of memory数据
●数据存储器：测量值数据... 800数据数， 大， 小，平均数据... 10CH
●数据输出：ASCII格式（BAOD速率19200）在输出数据时，需要单 的USB电缆（USB MINI B类型）（USB MINI B类型）
●自动清除时间：0.1至3.0至3.0至3.0秒（0.5秒），将自动显示（0.5秒）（0.5秒）（0.5秒）。 Manual zero clear with 0.0 seconds setting
●One-touch zero: Zero can be adjusted with one touch from any measurement mode
●Number of counts: 1 to 99 counts (count in tightening direction)
●Power supply: 1.2v nickel-hydrogen battery x 4 cells (800mAh)
●Charging time/usage time: Charging approximately 3 hours/Continuous for 12 hours at maximum charge
●Auto power off: After leaving for 10 minutes Power off: Power off: □ 9.5 male
●Weight: Approximately 470g
●Accessories: One-way socket, dedicated charger, inspection report (manufacturer manufacturing data), calibration certificate, traceability system chart
[Notes]
●The address is not included in the included documents.
