Pisco软尼龙管黑色4x2.5 20m NB0425-20-B

产品详情

特征

极好的压力性，耐磨损性和冷阻力。
也可以用于热水和加热中等油。
切割标记以大约500mm的间隔显示，切割试管时很有用。

note

不要在管子上施加任何载荷，例如张力，扭转或极端弯曲。这会导致管子塌陷，破裂或掉落。
请通过摩擦或纠缠管来避免划痕。这会导致管子破裂。
随着温度的升高，管的断裂压力降低，因此请确保了解工作压力并寻找足够的安全系数。
请在最小弯曲半径或更高的情况下使用管。
请确保您有足够的空间来考虑管管管中的长度变化。

在

产品规格

规格和标准	Maximum operating pressure: 1.3MPa (at 20℃65%RH) Using vacuum pressure: -100kPa Operating temperature range: -15 to 90℃ (water, heated oil, no freezing), -20 to 100℃ (air, no freezing) ISO9001 certified factory ISO14001 certified factory Color: Black Outer diameter (mm): 4 Inner diameter (mm): 2.5 Minimum bending radius (mm): 9 Total length (m): 20 Maximum operating pressure (MPa): 1.3(20℃ 65%RH) Operating temperature range (℃): For air: -20 to 100 (non-freezing)/For water and heated medium oil: -15 to 90 (non-freezing) Fluid used: Air, water (conditions apply), heated medium oil (conditions apply) Wall thickness (mm): 0.75 Tube outer diameter (φD)(mm): φ4 Tube inner diameter (φD)(mm): φ2.5 Minimum mounting radius (mm): 14
材料	尼龙（PA12）

规格和标准

Maximum operating pressure: 1.3MPa (at 20℃65%RH)
Using vacuum pressure: -100kPa
Operating temperature range: -15 to 90℃ (water, heated oil, no freezing), -20 to 100℃ (air, no freezing)
ISO9001 certified factory
ISO14001 certified factory
Color: Black
Outer diameter (mm): 4
Inner diameter (mm): 2.5
Minimum bending radius (mm): 9
Total length (m): 20
Maximum operating pressure (MPa): 1.3(20℃ 65%RH)
Operating temperature range (℃): For air: -20 to 100 (non-freezing)/For water and heated medium oil: -15 to 90 (non-freezing)
Fluid used: Air, water (conditions apply), heated medium oil (conditions apply)
Wall thickness (mm): 0.75
Tube outer diameter (φD)(mm): φ4
Tube inner diameter (φD)(mm): φ2.5
Minimum mounting radius (mm): 14

材料

尼龙（PA12）

联系我们

产品详情

特征

note

产品规格

相关产品