RSA503A USB实时频谱分析仪 21658

特征

覆盖从9kHz到3.0/7.5GHz的频率范围，以满足广泛的分析需求

当捕获40MHz捕获带宽时，可以实时分析和矢量分析。
标准GPS/GLONASS/BEIDOU接收器（用于映射）

跟踪生成器（可选），用于增益/损失，天线和电缆测量

可以使用流摄取
记录和播放长期事件
MIL-STD 28800 2级 条件，可以承受恶劣条件的冲击/振动特征

Built-in battery for long-term in the field

SignalVu-PC software provides real-time signal processing using DPX spectrum/spectrograms, greatly reducing the time required to measure transient signals and detect interfering signals.

With a 100% capture probability, it is possible to capture a minimum signal time of 100μs, so you can check it without missing any problematic phenomenon.
已发布的自定义程序开发的应用程序编程界面

Accessories such as tablet PCs, calibration kits, adapters, and phase-stable cables provide a complete field solution for detecting interference signals and transmitter maintenance.
●RSA500系列节省了时间并帮助 成功

The RSA500 series was built to utilize real-time spectrum analysis to solve problems for spectrum managers, interfering signal detection personnel and network maintenance personnel who need to work hard to identify sources of interference signals, maintain wireless networks and maintain work records.该系统的核心是基于USB的RF频谱分析仪，可在恶劣的 中捕获40个MHz频带。 It supports dynamic ranges of 70 dB and frequency bands up to 7.5 GHz, allowing you to accurately examine all specific signals in your measurements.利用USB消除了具有重型设备的需求，而是允许 使用轻质的Windows平板电脑或笔记本电脑。能够使用轻型PC代替重型频谱分析仪意味着 可以更快，更长的速度移动并更快地完成。

Optional tracking generators allow gain/loss measurements for quick testing of RF components such as filters, duplexers, and additional measurements of cable and antenna VSWR, return loss, distance to fault and cable loss can be added as needed.

使用

Spectrum Management

干扰信号检测

无线网络维护，安装和